Bränsle

Snabbkoppling tank, 1/4" NPT, 11mm

Hose clamp for fuel connection and bladder that is standard on many Mercury and Mariner models. Sold in 3-packs

Bränslefilter (10 Micron) med vattenavskiljare. Passar DF8A-300AP, DT9.9A-40W/WR/WK. 3/8" nipplar ingår. Max 117 l/h

Vanligt bensinfilter till Suzuki utombordare, passar 4-takts modeller från 9.9hk tom 90hk

Bensinfilter till Suzuki DT25, DT30, DT40 & DT55 tvåtaktsmodeller

For use with our 1/4 in. I.D. (black) fuel line. This bulb may be used in all applications not governed by US‑EPA 2011 regulations

For use with 5/16 in. (8 mm) I.D. fuel line

Water separating canister element with O-ring and the water sensor unit. For all 1996 and newer Mercury and Mariner V6 EFI outboards. Note that the sensor plus is blue plastic. Check your owner’s manual for inspection and replacement schedules. Manufactor: Mercury

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. The translucent plastic-cased filter allows you to check for fuel content and contaminants. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Used on the 30-40hp EFI FourStroke outboard, the 4-cylinder (996cc) 40-60hp. EFI FourStroke outboards, the 75-115hp FourStroke (1.7L, serial No. 1B366823-2B094995), the 75-115hp FourStroke (2.1L, serial No. 2B094996 and above), the 150hp EFI FourStroke (1B905505 and above) and the 135-300hp. Verado outboards. Manufactor: Mercury

Inline fuel filter 8M0176313 is for on-engine installation on 175-300hp 3.4L V6 and 4.6L V8 4-stroke outboards (serial No. 2B529482 & above). Replace the filter once each season, every 100 engine operating hours and/or as your owner's manual recommends based on engine use. The 10 micron fuel filter removes contaminants, particles and water from your fuel. Prevents harmful debris that may be in the gasoline fuel tank from getting to the engine to rob it of power and efficiency. See your owner's manual or service manual for more information. Manufactor: Mercury

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. It also fits in specific MerCruiser fuel filter housing. It fits the filter housings for Verado L4, L6 (serial No. 2B144122 and below). It fits 1.5L and 3.0L outboards using a vapor separator system with top screw in filters. It also fits MerCruiser 4.5L and 6.2L engines (serial No. 2A456613 and newer. Manufactor: Mercury

Using materials resistant to the chemistry of today's fuels, this bulb is designed to remain pliable longer. Two hose clamps are included. For use with our gray color, 5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line. This bulb may be used in all applications not governed by US‑EPA 2011 regulations. Priced individually, sold @ multiples of 4

For use with our 1/4 in. I.D. (black) fuel line. This bulb may be used in all applications not governed by US‑EPA 2011 regulations. Priced individually, sold @ multiples of 4

Used with newer fuel line diameter. Fits Force 40 hp. and larger (1993 and Newer), Force 9.9/15/25 hp. (1998) and all Mercury/Mariner outboards using clip on type disconnect at engine ends and 5/16" I.D (8 mm) fuel line.

Clip‑on style. A double sealed clip‑on type disconnect for the fuel tank end and fits a 5/16" (8mm) I.D. fuel line

For use with 5/16" (8 mm) I.D. hose and applications requiring a 1/4" NPT thread. Threads into our portable fuel tanks and will also work with our water separating filter bracket. A .250 inch ID brass fitting for use with gasoline fuel only. This material should not be used with diesel fuels.

Water separating canister element with O-ring and the water sensor unit. For all 1996 and newer Mercury and Mariner V6 EFI outboards. Note that the sensor plus is blue plastic. Check your owner’s manual for inspection and replacement schedules. Manufactor: Quicksilver

This replacement water separating fuel filter can be used on all Mercury Marine outboards (Mercury, Mariner or Force) and all MerCruiser sterndrive and inboard engines except 1992 MerCruiser 4.3L Gen II engines equipped with an inline fuel filter and not on 1.6L Vazer and 3.0L MPI engines. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Includes replacement filter and rubber gaskets for installation.

Inline fuel filter 816296Q2 is for use with 5/16" (8mm) inside diameter fuel lines. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. See your engine owner's manual for installation instruction.

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. The translucent plastic-cased filter allows you to check for fuel content and contaminants. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Used on the 30-40hp EFI FourStroke outboard, the 4-cylinder (996cc) 40-60hp. EFI FourStroke outboards, the 75-115hp FourStroke (1.7L, serial No. 1B366823-2B094995), the 75-115hp FourStroke (2.1L, serial No. 2B094996 and above), the 150hp EFI FourStroke (1B905505 and above) and the 135-300hp. Verado outboards. Manufactor: Quicksilver

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. It also fits in specific MerCruiser fuel filter housing. It fits the filter housings for Verado L4, L6 (serial No. 2B144122 and below). It fits 1.5L and 3.0L outboards using a vapor separator system with top screw in filters. It also fits MerCruiser 4.5L and 6.2L engines (serial No. 2A456613 and newer. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Manufactor: Quicksilver

Inline fuel filter 8M0176313 is for on-engine installation on 175-300hp 3.4L V6 and 4.6L V8 4-stroke outboards (serial No. 2B529482 & above). Replace the filter once each season, every 100 engine operating hours and/or as your owner's manual recommends based on engine use. The 10 micron fuel filter removes contaminants, particles and water from your fuel. Prevents harmful debris that may be in the gasoline fuel tank from getting to the engine to rob it of power and efficiency. See your owner's manual or service manual for more information. Manufactor: Quicksilver